Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with or as a result. Copy a Firmware BIN file to USB disk (root directory) with FAT 32. For example the. Please check your current firmware version before update. Updating the same version or downgraded is not allowed. Preparation: 1. A USB stick with 256MB at.

Important Notice Important Notices: 1. Please double check again for model name of your TV (Main menu->GetHelp->Support Information), takes wrong image may make your TV inoperable. Your TV setting will be lost during update procedure. Please check your current firmware version before update. Updating the same version or downgraded is not allowed. Preparation: 1. A USB stick with 256MB at least.

Formatted with FAT32 format. Firmware: Please get from the download link. Unzip the download file without password. Be note, the file name should not be changed or your firmware update will not work. 43/49/55/65L621U: UPDATE_CASTTV_UHD_01.04.088_FY17_sc_INIT_CLEAR.prg 4. Copy the firmware file “UPDATE_CASTTV_UHD_01.04.088_FY17_sc_INIT_CLEAR.prg” to root directory of your USB stick Start update: Please download detail procedure in following link Firmware Release Notices: 1. Other bug fixes and performance improvement.

• LCD Color Television 32AV933N Ver. 1.00 Updating history Currently there are no updates available.

Please check back at a later time for any future updates. >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved.

• OR IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein. • Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts. • PCBs as the level of heat required to melt lead-free solder is high. >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved.

• Print this page SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE 'SAFETY PRECAUTION' AND 'PRODUCT SAFETY NOTICE' INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER.

THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS. Parts mounting and routing dressing of wirings should be the same as that used originally.

For safety purposes, insulating materials such as isolation tube or tape are sometimes used and printed circuit boards are sometimes mounted floating. Also make sure that wirings is routed and clamped to avoid parts that generate heat and which use high voltage. • Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. Or peak reading) Input resistance: Input capacitance: 200 pF Frequency range: 15 Hz to 1 MHz and d.c.

Respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms. The measuring instrument is calibrated by comparing the frequency factor of with the solid line in figure F.2 of IEC 60990 at various frequencies.

• >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts which do not have the same safety characteristics as specified in the parts list may create electrical shock, fire, or other hazards. >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • Print this page SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid.

Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water. Carefully align the holes at all four corners of the LCD module with the corresponding holes in the LCD cover and fasten with screws. Do not strongly push on the module because any impact can adversely affect the performance. Also use caution when handling the polarized screen because it can easily be damaged. Glass is used in the panel, so do not drop or strike with hard objects.

Jonn1 さん (email@gmail.com) 2012年 10月 30日 23時 58分 21秒 URL:http://cookbj2.magix.net/public/instruktsiya-dlya. Verslo naujienos| Verslas| Nemokamos teisinės konsultacijos| Dokumentų šablonai| Įmonių naujienos, Asmens išregistravimas iš buto. Kur kreiptis?, teisinė konsultacija. [1199079] PPSbzGtoXIAIVYUGsof 投稿者：Krafoqiv [甲信越] 投稿日：2012/09/11(Tue) 20:33 Starting A Business, http://gigabank.allalla.com/kredit-nalichnimi-v. Igri dlya portativnogo dvd cover. Jonn3 さん 2012年 10月 27日 04時 41分 44秒.