CPU-Z uses a configuration file, cpuz.ini, that allows to set several parameters for the program. The cpuz.ini file must be in the same directory as cpuz.exe. Note that the use of this file is optional. If no.ini file is found, default values will be used. It looks like this: [CPU-Z] TextFontName=Verdana TextFontSize=13 TextFontColor=000060 LabelFontName=Verdana LabelFontSize=13 PCI=1 MaxPCIBus=256 DMI=1 Sensor=1 SMBus=1 Display=1 UseDisplayAPI=1 BusClock=1 Chipset=1 SPD=1 CheckUpdates=1 TextFontName Font used for the information boxes. TextFontSize Size of the font used for the information boxes.

TextFontColor Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code: RRGGBB LabelFontName Font used for the label boxes. LabelFontSize Size of the font used for the label boxes. Sensor Set to OFF (or 0) disables sensor chip detection and voltages measurement. DMI Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. PCI Set to OFF disables the PCI information.

The CPU-Z‘s detection engine is now available for customized use through the CPUID System Information Development Kit, a professional SDK built for the Microsoft Windows & Android.

Simply simon pizza. This disables chipset, SPD and, depending on the hardware, sensoring information. MaxPCIBus Sets the maximum PCI bus to scan.

Imam Abul-Hasan al Ashari. Shaykh Abdul Hamid Al Hajoori. Shaykh Muhammad Ibn Khalifah al-Tamimi. Download al fiqh al muyassar pdf. Share your thoughts with other customers.

Default value is 256. SMBus Set to OFF (or 0) disables SMBus information: SPD, and, depending on the hardware, sensoring information. Display Set to OFF (or 0) disables the video card information reported in the validator. ShowDutyCycles Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable. UseDisplayAPI Set to 1, uses the display driver to read the display adapters information.

0 to disable. Txt=report Launch CPU-Z in ghost mode: no interface appears, the register dump (report.txt) is automatically created.Example: cpuz.exe -txt=c: mydirectory mysystem: runs CPU-Z in ghost mode. Report file mysystem.txt is automatically generated in directory c: mydirectory. -html=report Same as '-txt' but generates the html report file. -core=id Displays clock speed of core #id (id can be set from 0 to 'Number of cores minus one').

It is then possible to check the speed of each core by running as many instances of CPU-Z as necessary, using batch files for example: cpuz0.bat: cpuz.exe -core=0 cpuz1.bat: cpuz.exe -core=1 Note that the current core can be dynamically selected by right-clicking in the CPU page, and select the target core. This feature is available from version 1.42.

-console Generates output in a command prompt (Windows XP only).